We believe the preeminent hardware is the key to a successful product so we have designed the state of the art hardware.
Ultra-Low Power Processor ( up to 4.4 GHz) 4 dual cores designed to boost your AI on the Edge solution.
- 4GB/8GB/16GB LPDDR4
- 64 GB HS400 eMMC
- SATA3 port (SATA 6Gb/s)
- Microsoft Windows 10 full version, Linux (ubilinux, Ubuntu, Yocto)
Neural Network Accelerator
AI Neural network accelerators delivers up to four trillion operations per second (TOPS)
Support Framework : TensorFlow, Caffe, MXNet, Kaldi, OpenVINO, ONNX, Open CV4
Graphics and Audio
Ultra HD Graphic processor 4K support , Graphics Output eDP/DP/HDMI/DVI
1 Full HDMI 2.0 - 4K (3840x2160) @ 60 hz
1 DisplayPort 1.2 - 4K (4096x2160) @ 60 hz
Audio Out/Mic In, I2S
ALC887 for Audio Out/Mic In via combo jack
Hat connector: pin compatible with Raspberry Pi Pin position
MCU : Integrated STM32F103C8 MCU
USB 2.0 pin header 1
USB 3.0 Type A 4
UART 1 x HSUART (pin header)
Serial port 2x RS232/422/485
HDD interface 1 x SATA 3.0
Expansion Slot 1x M.2 2280 M key, 1x M.2 2230 E key, 1x mPCIe
AIO/DIO via GP-bus
40-pin GP-Bus 1
100-pin GP Bus 1
2 - SIM Slots
Programmable I/O managed by a STM32F103C8 MCU.
40 pin with 3.3V, 5V, GND, programming pins (for STLink Programmer) and multifunction I/O (GPIO, PWM, I2C, ADC, CAN, I2S, UART, SPI)
Networking and Connectivity
Ethernet 6x GbLAN (with TSN support)
2x WiFi Module 802.11 b/g/n/ac/ax/ ( M.2 PCIe )
Bluetooth 5.0 module ( via. M.2 )
2x 5G/LTE/4G modem ( via. mPCIe ) can be upgraded upto 4 cellular modem.
Embedded GNSS with 9 axis IMU including RTK that is capable of 10mm, three-dimensional accuracy.
Concurrent reception of GPS, GLONASS, Galileo and BeiDou.
Power Supply Specifications
12V-60V wide range with lockable connector.
Power Consumption ( typical) 15~26 Watt